# Set a logo and a profile picture

## Purpose
Put your organisation's logo on the account and its public pages, and set your own
profile picture.

## Who this is for
Account administrators for the logo; any member for their own picture.

## The account logo

Sidebar **Branding**. There are two ways to set it, and one wins over the other.

**Upload a file**

1. Choose **Upload logo**.
2. Pick a **PNG or JPG**, up to **5 MB**. Other formats are refused with "Please choose
   a PNG or JPG image."; oversized files with "Image is too large (max 5MB)."

The page confirms with "Logo uploaded." and shows a preview.

If instead you see an amber note reading *"Logo uploaded … It will render once managed
file storage is enabled for this environment"*, the upload succeeded but this
environment cannot serve the bytes back yet. Use the URL option below until managed file
storage is switched on.

**Point at an image URL**

Under **Or use an image URL**, paste an `https://` address to an image you already host
and choose **Save URL**. Clearing the field and saving removes it.

**Which one wins:** on this page, an uploaded logo takes precedence over the URL
whenever both are set. Remove the uploaded logo (**Remove uploaded logo**, then confirm
**Remove logo**, which deletes the stored file) to fall back to the URL.

## Where the logo appears
- The account header on your dashboard, next to the account name.
- The header of every page a participant sees under your name: the public campaign
  page, the application form and its confirmation, the welcome page, the
  questionnaire and its completion screen. The campaign's own image is the square
  beside the campaign's headline, not a second logo in the header.
- The cover of the copy of their answers a participant saves as a PDF.
- Your outgoing email (see below).

All of these apply the upload-wins rule: an uploaded logo is shown when it can be,
otherwise the image URL. Uploading a file does not clear a URL that is already set.

**In the dark theme** a logo drawn for a white page (dark lettering, a transparent
background) would disappear against the dark header. So when a participant has
chosen the dark theme, the logo in the header of the public campaign page, the
welcome page, the application form and the questionnaire sits on a small white
plate, at the same size as in the light theme. Emails and the PDF are always light
and are unchanged.

## A logo for French pages

If your logo carries words, you may have a French version of it (for example a
signature with your French name). Upload it under **Logo for French pages
(optional)**, below the account logo:

1. Choose **Upload French logo**.
2. Pick a **PNG or JPG**, up to **5 MB**, as for the account logo.

The page confirms with "French logo uploaded." From then on, every page above that a
participant reads in French, the French copy of their answers, and every email whose
first language is French show the French logo. English and every other language keep
the account logo. An email written in two languages shows the logo of the language it
starts with.

**Remove French logo** (then confirm) goes back to the account logo in French too.
If the French file ever cannot be shown, French pages fall back to the account logo
rather than to no logo, and the Branding page says so in an amber note.

The French logo is an upload only: there is no French image URL.

## When the logo includes your name

Some logos already spell out the organisation's name, such as a government signature
(a flag followed by "National Research Council Canada"). Squeezed into the small logo
space beside your name, that text becomes unreadable, and the name is printed twice.
Tick **The logo includes our name** on the Branding page; it is saved straight away.

When it is ticked:

- **Public campaign page:** the logo is shown 40 px tall at its own proportions, and
  your name is not printed beside it. On a laptop the logo, the access label (for
  example "Open registration") and the language switch share one row; on a phone the
  logo has its own row and the label and the switch sit under it.
- **Questionnaire, application form and welcome page:** the logo is 40 px tall,
  followed by a thin divider and the title. In the questionnaire on a laptop, the
  "Draft saved" status sits under the title rather than beside it, so a long title
  (for example "Projet pilote BIMMaS : ensemble de base") stays on one line. On a
  phone the logo has its own row.
- **Emails:** the logo at the top of the message is 40 px tall.
- **The PDF copy of their answers:** the logo on the cover is 40 points tall.

The logo is never stretched or squashed: where a screen is too narrow for it, it is
shown smaller, whole. Your name stays the logo's text alternative, so screen readers
still announce who runs the campaign. When the box is clear, every page looks as it
did before.

Tick it only when the logo really does say your name. A logo that is only a symbol
would leave participants with no name in the header.

## What reaches your emails

Invitations, reminders, acceptance letters and feedback notices carry:

- **Your logo**, in place of the product wordmark at the top of the message. Resolved
  by the upload-wins rule above, and note the storage caveat: where this environment
  cannot serve an uploaded file publicly, the message shows the product wordmark rather
  than falling back to the URL, because the account said which logo it wants.
- **Your primary colour**, on the message's button and on the wordmark, when it is set
  as a `#rrggbb` (or `#rgb`) value. Anything else is ignored rather than guessed at.

Everything else in the message (the text colours, the card, the footer) stays the
product's, so a branded message is still legible and still recognisably from this
platform. An account that has set neither a logo nor a colour sends exactly the message
it sent before tenant branding existed.

The message is **signed with the product's name**, not your account's. There is no
per-account product name; if you need one, ask.

## Your organisation's name in French

Participants are told who runs a campaign by your **account name**: on the public
campaign page, the application form, the welcome page, the questionnaire and its
completion screen, the copy of their answers, and every respondent email ("Sent on
behalf of ..."). If your organisation has an official French name, set it so French
text uses it instead.

1. On the account dashboard, open **Account info**.
2. Under **Organisation name in French**, choose the pencil, type the name (for
   example "Conseil national de recherches Canada"), and save.

French pages and the French part of every respondent email then name your
organisation this way. English text, and every other language, keeps the account
name. Leave the field empty (clear it and save) to go back to the account name in
French too. The name can be up to 160 characters, like the account name. Only account
administrators can change it.

## Campaign and assessment images

Separate from the account logo:

- A **campaign image** is set in campaign **Settings → Campaign Info**, and takes
  precedence over the account logo on that campaign's public page.
- An **assessment image** is set in assessment **Settings → Assessment Info**.
- A campaign can also carry a **Custom Document** (PDF or DOCX) offered on its public
  page.

## Your own profile picture

Your own **Profile & Preferences** page (click your name at the foot of the sidebar,
it is not a sidebar entry), in the **User Profile** section. Two options again:

- **Avatar URL**: paste a link to an image.
- **Or upload an avatar image**: **Upload image**, same PNG/JPG and 5 MB limits. An
  uploaded image takes precedence over the URL, and **Remove** clears it.

The same storage caveat applies: if you see "Avatar uploaded; it renders once managed
file storage is enabled for this environment", the file is stored but not yet servable.

Note that the name and picture shown in the sidebar footer come from your **BIMei**
identity, which is authoritative for who you are across BIMei products. The avatar here
is the account-scoped one. If you want the same picture everywhere, set it in BIMei:
there is a "Manage your BIMei account" link at the bottom of the sidebar.

## Limits and gotchas
- PNG and JPG only. Not SVG, not WebP, not GIF.
- 5 MB is enforced in the browser before upload.
- You cannot set an avatar for someone else while inviting them. Avatars are set by
  each person from their own profile page, or come from BIMei.

## Related pages
- [What language your emails go out in](/operate/tenant-admin/transactional-email-language)
- [Create a campaign](/operate/tenant-admin/create-a-campaign)
- [Invite members and assign roles](/operate/tenant-admin/invite-members-and-assign-roles)
